Mass and magnetic properties for 3D geological and geophysical modelling of the southern Agnew–Wiluna Greenstone Belt and Leinster nickel deposits, Western Australia

Abstract

Physical property measurements provide a critical link between geological observations and geophysical measurements and modelling. To enhance the reliability of gravity and magnetic modelling in the Yilgarn Craton's Agnew–Wiluna Greenstone Belt, mass and magnetic properties were analysed on 157 new rock samples and combined with an existing corporate database of field measurements. The new samples include sulfide ore, serpentinised and olivine-bearing ultramafic host-rocks, granitoid, and felsic and mafic volcanic and volcaniclastic country rock. Synthesis of the data provides a useful resource for future geophysical modelling in the region. Several rock types in the region have sufficiently distinct physical properties that a discriminant diagram is proposed to facilitate a basic classification of rock types based on physical properties. However, the accumulation of emplacement, metamorphic, hydrothermal and structural processes has complicated the physical properties of the rocks by imposing duplicate and sometimes opposing physical property trends. The data confirm that massive sulfide and ultramafic rocks have the most distinctive mass and magnetic properties but with variability imposed by their complex history. Sulfide content imposes the strongest control on densities, but can only be identified when comprising >10 vol% of the rock. The pyrrhotite-rich Ni-sulfide assemblages generally have similar magnetic properties to the host ultramafic rocks, but can have much lower susceptibilities where the thermal history of the rocks has favoured development of hexagonal pyrrhotite over monoclinic pyrrhotite. In ultramafic rocks that contain <10 vol% sulfides, density and susceptibility are primarily controlled by serpentinisation, with olivine breaking down to serpentine and magnetite in the presence of water. Serpentinisation dramatically lowered densities and increased susceptibilities, but had limited influence on the intensity of remanent magnetisation. All ultramafic rocks contain multidomain magnetite, and most contain low coercivity grains prone to overprinting by in situ viscous remanent magnetisation or drilling-induced isothermal remanent magnetisation during extraction. Despite the low coercivities, Koenigsberger ratios of 1–20 are observed indicating that viscous remanent magnetisation aligned parallel to the present Earth field must be considered in any magnetic modelling. It is also noted that coarser-grained intrusive varieties of all rock types (e.g. granite, gabbro) show remanent magnetisation intensities 1–2 orders of magnitude greater than their extrusive equivalents (felsic and basaltic volcanics).