Abstract

This work aims to valorize the shrimp wastes as a template for obtaining nanoparticulate tin battery electrodes. Using shrimp waste skins is possible to get a network material made of nanominerals (NMN) with elements such as Ca, Mg, Na, and Al and containing a rich source of nitrogen. Three different electrode materials prepared under different conditions validated this study. Shrimp wastes (SW), SW-tin prepared at room temperature (ST-RT) and SW-tin prepared by carbothermal reduction (ST-CT) are studied. 119 Sn Mössbauer spectroscopy determined the atomic fraction is 59.5 and 40.5% of SnO 2 and β-Sn co-existing in the ST-CT sample. SEM and TEM micrographs confirmed a particle size of 2–5 nm of tin-based materials homogeneously distributed on the NMN matrix. Electrochemical investigation in Na-half cells demonstrated superior electrochemical performance of ST-CT with 162 mA h g −1 reversible capacity which can be retained at 60% over 200 cycles under different rates (C/10 to 2 C). The SW and ST-RT displayed the worse reversible capacities. Eventually, a Na-ion full cell is assembled versus Na 3 V 2 (PO 4 ) 3 showing good properties in terms of energy density. • We use shrimp/tin waste (STW) material, which has never been tested for energy storage. • Advanced storage properties in Na-ion full cells are proposed for first time using natural sources. • Na-half cells shows a 162 mA h g −1 of reversible capacity retained 60% over 200 cycles. • Combined with NVP cathode, it exhibits average cell potential of 2.5 V reaching 310 W h kg −1 .

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call