Abstract
Mixed Mg(OH)2/CeO2 coatings were deposited by cathodic electrodeposition on AISI 4135 steel in order to improve its resistance to marine corrosion. CeO2 coating was first prepared by cathodic electrodeposition in a low concentration of cerium nitrate bath. Then, brucite layer is formed by cathodic polarisation in magnesium nitrate bath. Scanning electronic microscope (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and micro-Raman spectroscopy (μ-Raman) analysis were used to study the morphology, chemical composition, microstructure and thickness of the coatings. The corrosion resistance of the coatings was evaluated in artificial seawater by electrochemical methods. CeO2 coating presents a porous and cracked structure; consequently, it offers low corrosion protection of steel in seawater. However, Mg(OH)2/CeO2 mixed coatings have a more uniform and compact structure and present a better corrosion protection of steel in seawater. The protection efficiency of these coatings is then discussed and a protection mechanism is proposed after surface and cross-section SEM and μ-Raman analyses of the coating after several seawater immersion durations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.