Marginal Aggregates: The Role of Clays.

Abstract

Clays are components in the fine portion of aggregates, less than 75 microns in size (micro-fines), which are usually washed away when producing coarse or fine (manufactured sand) aggregates in quarries. When marginal sources of aggregates are being used, the content of this washed portion can be quite high, and there is an incentive to keep as much of it in the aggregate, including the clays. The present paper presents a comprehensive treatment of the role of clays in terms of the characterization of their composition and quantification of their effects on the rheological and mechanical properties of cementitious systems, as well as the means to mitigate deleterious influences. It is shown that the strategy for neutralizing the effect of micro-fines containing clays on increased water demand in concrete can be quantified in terms of the combination of their content in concrete and their nature as characterized by the methylene blue value (MBV); this is a more rational approach to considering their influence than their content in specific aggregates as specified in standards. The effect of low and medium MBV aggregates on the water requirement can be neutralized by lignosulfonates when their content in the concrete is below a threshold value of about 150 kg/m3; polycarboxylates (PC) are required at higher contents; for high MBV aggregates, a combination of PC and clay mitigating admixture (CMA) is required. It is also demonstrated that with proper treatment, such micro-fines can be turned into useful fillers, enhancing the strength of concrete and thus also serving as a means for reducing cement content.