Abstract
Scanning internal photoemission microscopy (SIPM) is applied to characterize Ni Schottky contacts formed on a thick low-carrier-density drift layer grown on facet-growth freestanding GaN substrate. Four variations of the Schottky contact dots are prepared, those formed in the c-plane growth region, in the facet growth region, in the region including the boundary between the c-plane and facet regions, and in a region including a large-dislocation-density area at the center of the facet growth region. For all the samples, the SIPM photoyield (Y) maps obtained using visible lasers showed that the Y and Schottky barrier height were sufficiently uniform over the contacts, resulting in uniform metal–semiconductor interfaces. The growth mode boundary and the large-dislocation area, as a vague pattern consisting of large- and small-Y regions of about 100 μm, are clearly observed in the Y map using a near-ultraviolet laser. Device breakdown under high voltage occurred in the large-dislocation-density region with large Y. The results indicate that this method can predict device failure in conjunction with crystal defects and the electrical characteristics of Schottky contacts.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.