Abstract

Scanning internal photoemission microscopy (SIPM) is applied to characterize Ni Schottky contacts formed on a thick low-carrier-density drift layer grown on facet-growth freestanding GaN substrate. Four variations of the Schottky contact dots are prepared, those formed in the c-plane growth region, in the facet growth region, in the region including the boundary between the c-plane and facet regions, and in a region including a large-dislocation-density area at the center of the facet growth region. For all the samples, the SIPM photoyield (Y) maps obtained using visible lasers showed that the Y and Schottky barrier height were sufficiently uniform over the contacts, resulting in uniform metal–semiconductor interfaces. The growth mode boundary and the large-dislocation area, as a vague pattern consisting of large- and small-Y regions of about 100 μm, are clearly observed in the Y map using a near-ultraviolet laser. Device breakdown under high voltage occurred in the large-dislocation-density region with large Y. The results indicate that this method can predict device failure in conjunction with crystal defects and the electrical characteristics of Schottky contacts.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call