Mapping landslide surface displacements with time series SAR interferometry by combining persistent and distributed scatterers: A case study of Jiaju landslide in Danba, China

Abstract

InSAR technology provides a powerful tool to detect potentially unstable slopes across wide areas and to monitor surface displacements of a single landslide. However, conventional time series InSAR methods such as persistent scatterer interferometry (PSI) and small-baseline subset (SBAS) can rarely identify sufficient measurement points (MPs) in mountainous areas due to decorrelations caused by steep terrain and vegetation coverage. In this study, we developed a new InSAR approach, coherent scatterer InSAR (CSI), to map landslide surface displacements in the radar line-of-sight (LOS) direction by combining persistent scatterers (PS) and distributed scatterers (DS). The key ideas of CSI include the employment of the generalized likelihood ratio (GLR) test for the identification of statistically homogeneous pixels (SHPs) and the use of the phase linking algorithm to estimate optimal phase for each DS pixel. The joint exploitation of PS and DS targets dramatically increases the spatial density of MPs, which makes the phase unwrapping more reliable. To demonstrate the effectiveness of the CSI approach, we applied it to retrieve the historical displacements of the Jiaju landslide in Danba County of southwest China using 19 L-band ALOS PALSAR images (2006–2011) and nine C-band ENVISAT ASAR images (2007–2008). Multiple comparisons clearly illustrated the big advantages of CSI over PSI and SBAS in mapping landslide displacements with more details owing to much higher (>10 times) MP density. Furthermore, the superiority of L-band SAR data over C-band for landslide investigation in rural environments was confirmed. Quantitative validation of the CSI results for PALSAR data against in-situ GPS measurements suggested an accuracy of about 10.5millimeters per year (mm/year) in terms of root mean square error (RMSE). Afterwards, the spatial-temporal characteristics of the Jiaju landslide surface displacements were summarized, with a new upper boundary for the active northern part delineated. Particularly, the northern part of the landslide moved faster than the southern part, exhibiting a maximum LOS displacement rate of around 120mm/year. Subsequently, the fluvial erosion by the Dajinchuan River was identified as the predominant impact factor for the instability of the Jiaju landslide. Finally, the major problems and challenges for the application of CSI method were discussed, and the conclusions were given.