Abstract
The main problem from autonomous robot for navigation is how the robot able to recognize the surrounding environment and know this position. These problems make this research weakness and become a challenge for further research. Therefore, this research focuses on designing a mapping and positioning system using Simultaneous Localization and Mapping (SLAM) method which is implemented on an omnidirectional robot using a LiDAR sensor. The proposes of this research are mapping system using the google cartographer algorithm combined with the eulerdometry method, eulerdometry is a combination of odometry and euler orientation from IMU sensor, while the positioning system uses the Adaptive Monte Carlo Localization (AMCL) method combined with the eulerdometry method. Testing is carried out by testing the system five times from each system, besides that testing is also carried out at each stage, testing on each sensor used such as the IMU and LiDAR sensors, and testing on system integration, including the eulerdometry method, mapping system and positioning system. The results on the mapping system showed optimal results, even though there was still noise in the results of the maps created, while the positioning system test got an average RMSE value from each map created of 278.55 mm on the x-axis, 207.37 mm on the y-axis, and 4.28o on the orientation robot.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
