Abstract
Reactive inkjet printing (RIJ) was used as an additive manufacturing (AM) tool. Combined with polyurethane (PU) chemistry, it is shown that RIJ can be used to build micro-scale foams. Waterblown polyurethane foams (PUF) based on polyethylene glycol 200 (PEG200), glycerol ethoxylate (Star-PEG) and 1,6-hexamethylene diisocyanate (HDI) were used to prepare the foams. The system was catalyzed using iron(III) chloride, dibutyltin dilaurate (DBTL), diazabicyclo octane (DABCO) and bis(2-dimethylaminoethyl) ether. The influence of iron(III) chloride and DBTL were investigated by means of temperature profile measurements. The stability of the catalyst system was tested for 32 hours within the ink formulation. The ink formulations were then printed with a Dimatix DMP3000 (Fujifilm, USA) printer using a 16 nozzle printhead with a nominal 10 pL drop volume. The reaction of the inks and the building of PUF after printing were investigated by light microscopy and SEM. It seems favorable to use high amounts of catalyst in order to obtain a more porous structure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
