Manufacturing of macroporous cellulose monolith from green macroalgae and its application for wastewater treatment

Abstract

Enormous interest in using marine biomass as a sustainable resource for water treatment has been manifested over the past few decades. Herein, the objective was to investigate the possible use of green macroalgae (Codium tomentosum) for cellulose-based foam production through a versatile and convenient process. Macroporous cellulose monolith was prepared from cellulose hydrogel using freeze-drying process, resulting in a mechanically rigid monolith with a high swelling ratio. The as-produced spongy-like porous cellulosic material was used as bio-sorbent for wastewater treatment, particularly for removing methylene blue (MB) dye from concentrated aqueous solution. The adsorption capacity of MB was subsequently studied, and the effect of adsorption process parameters was determined in a controlled batch system. From the kinetic studies, it was found that the adsorption equilibrium was reached within 660 min. Furthermore, the analysis of the adsorption kinetics reveals that the data could be fitted by a pseudo-second order model, while the adsorption isotherm could be described by Langmuir isotherm model. The maximum adsorption capacity was found to be 454 mg/g. The findings suggested that the produced cellulose monolith could be used as a sustainable adsorbent for water treatment.