Abstract

Stir casting method has become prominent for fabrication of metal matrix composites in recent years. This method can be adjusted for casting around space holding particles to obtain cellular composite materials. In this study, a specific method which is a combination of stir casting and space holder techniques were used to produce open-celled A360 aluminium-B4C composite foams with regular sized and distributed pores. Weight ratios of reinforcement particles determined as 0.5, 1, 1.5 and 2%. The influences of particle reinforcement on the microstructure and the mechanical behaviour of composite foams were investigated. Microstructures were analysed with optical microscope (OM), scanning electron microscope (SEM). Compression and hardness tests were carried out to observe the effects of reinforcement on mechanical properties. Compression strength properties and hardness of composites increased with the ceramic reinforcement, however the plastic strength of the composite foams showed worsening trend after a certain reinforcement ratio (0.5 wt.%). Energy absorption properties of the composite foams showed parallel trends with compressive strength properties.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.