Manufacture technique and electrical properties evaluation of bamboo charcoal polyester/stainless steel complex yarn and knitted fabrics

Abstract

There are derivative problems of electromagnetic wave radiation accompanying the advances of science and technology nowadays and secure protections are also emphasized gradually. To shield these electromagnetic wave radition jeopardizing people’s health, in this study, stainless steel wires were the core yarn and bamboo charcoal polyester textured yarns were the wrapped yarn. The bamboo charcoal polyester/stainless steel (BC/SS) complex yarns were manufactured using a rotor twister machine. The BC/SS complex knitted fabrics were woven with the complex yarns employing a circular knitting machine. Three manufacture parameters were the wrapped amount of the complex yarn (2 to 6 turns/cm), the lamination amount of the knitted fabrics (1 to 6 layers) and lamination angles of the knitted fabrics (0°/0°/0°/0°/0°/0°, 0°/45°/90°/−45°/0°/45°, and 0°/90°/0°/90°/0°/90°). The knitted fabric exhibited the lowest surface resistance 32.3 Ω/sq. Optimum electromagnetic shielding effectiveness (EMSE) was 45 dB when the knitted fabrics were with 0°/45°/90°/−45°/0°/45° laminating in 0.51 GHz.