Abstract
An aluminum/high-density polyethylene (HDPE) functionally graded material (FGM) has been fabricated as an essential component of a multifunctional building envelope for high performance of energy efficiency and sustainability. The mass production of the FGM was realized by using coarse aluminum (Al) particles and fine HDPE powder through a vibration-sedimentation process. The gradation of the FGM across its thickness direction was analyzed by developing a modified Rice method, from which five different uniform Al-HDPE samples were made to characterize the material properties of the five sub-layers of the FGM. The mechanical and thermal physical properties of the FGM such as Young's modulus, Poisson ratio, thermal expansion coefficients and thermal conductivities were obtained by various experimental characterizations. A prototype FGM panel with water tubes embedded was fabricated by the vibration and sedimentation combined approach and the thermal efficiency of the FGM panel was evaluated. Under an irradiation level of 620w/m2 and a water flowing rate of 60ml/min, a 22.3°C water temperature increase and an average 18.7°C surface temperature decrease of the FGM panel were achieved, which demonstrates that significant PV conversation efficiency improvement can be realized for both electricity generation and heat collection by the presented FGM panel. The presented fabrication procedures and the associated experimental characterization methods and results can serve as a baseline for quality control of the manufacture of the green energy building envelope materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have