Making MUSIC: A multiple sampling ionization chamber

Abstract

A multiple sampling ionization chamber (MUSIC) was developed for use in conjunction with the Atlas scattering chamber (ATSCAT). This chamber was developed to study the (α,p) reaction in stable and radioactive beams. The gas filled ionization chamber is used as a target and detector for both particles in the outgoing channel (p+ beam particles for elastic scattering or p+residual nucleus for (α,p) reactions). The MUSIC detector is followed by a Si array to provide a trigger for anode events. The anode events are gated by a gating grid so that only (α,p) reactions where the proton reaches the Si detector result in an anode event.The MUSIC detector is a segmented ionization chamber. The active length of the chamber is 11.95in. and is divided into 16 equal anode segments (3.5in.×0.70in. with 0.3in. spacing between pads). The dead area of the chamber was reduced by the addition of a Delrin snout that extends 0.875in. into the chamber from the front face, to which a mylar window is affixed. 0.5in. above the anode is a Frisch grid that is held at ground potential. 0.5in. above the Frisch grid is a gating grid. The gating grid functions as a drift electron barrier, effectively halting the gathering of signals. Setting two sets of alternating wires at differing potentials creates a lateral electric field which traps the drift electrons, stopping the collection of anode signals. The chamber also has a reinforced mylar exit window separating the Si array from the target gas. This allows protons from the (α,p) reaction to be detected. The detection of these protons opens the gating grid to allow the drift electrons released from the ionizing gas during the (α,p) reaction to reach the anode segment below the reaction.