Abstract
This study explores the feasibility of bioactive glass scaffolds by using a stereolithographic technology (digital light processing-based vat photopolymerization) as fabrication method and the micro-tomographic reconstruction of an open-cell polymeric sponge as input virtual model to the printing system, in the attempt to replicate the trabecular architecture of cancellous bone. Additively-manufactured scaffolds were investigated from morphological (scanning electron microscopy), microstructural (X-ray diffraction), mechanical (compressive tests) and bioactive viewpoints (immersion studies in simulated body fluid (SBF)). Well-densified foam-like glass scaffolds were obtained after sintering, provided with suitable mechanical properties (compressive strength 21.9 ± 6.2 MPa, elastic modulus 4.8 ± 0.1 GPa, Weibull modulus 3.9) for bone-contact applications. The formation of a hydroxyapatite layer on scaffold struts after soaking in SBF also demonstrated the in vitro bioactivity of the printed structures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.