Abstract
The percolation behaviour of a polymer/metal composite (PMC), comprising polyvinylidene fluoride (PVDF)/nanocrystalline nickel (n-Ni) prepared by cold press and hot press methods, has been compared. Higher effective dielectric constants (εeff) with lower loss tangent (Tan δ) were observed for the cold pressed samples as compared to the hot pressed samples, which is attributed to better homogeneity and uniform distribution of n-Ni in the PVDF matrix. The percolation parameters [percolation threshold (fc) and critical exponents (s and s′)] are largely tuned due to the difference in process conditions. The non-universal fc, s, and s′ have been explained with the help of the percolation theory. PMC prepared though cold pressing would be a better candidate for static and low frequency dielectric applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.