Maintainability of the helical reactor FFHR-c1 equipped with the liquid metal divertor and cartridge-type blankets

Abstract

The maintenance scheme in the compact helical fusion reactor, FFHR-c1, equipped with the liquid metal divertor, REVOLVER-D (Reactor-oriented Effectively VOLumetric VERtical Divertor) and the cartridge-type molten salt blankets, CARDISTRY-B (CARtridges Divided and InSerTed RadiallY − Blanket), is investigated. The magnetic configuration of the compact variant FFHR-c1 is similar to that of the Large Helical Device (LHD), while the device size is 2.8 times enlarged from LHD and a strong magnetic field strength of ∼8 T at the plasma center is adopted. The maintenance of the REVOLVER-D is simpler than that of the helical divertor with a complicated structure as seen in the LHD. In the REVOLVER-D, showers of molten tin are injected into the ergodic layer at 10 inner ports. To circulate the molten tin, 10 sets of the shower system including a liquid metal pump, ducts, a showerhead, a pool, and a heat exchanger, are installed. These can be replaced with simple up/down motions. The CARDISTRY-B consists of 320 tritium breeding blanket cartridges, which are toroidally segmented every two degrees. These cartridges are maintained by using heavy manipulators with a simple 4DOF motion at a constant toroidal angle.