Main-chain imidazolium polymer membranes for CO 2 separations: An initial study of a new ionic liquid-inspired platform

Abstract

Three dense polymer membranes composed of main-chain, poly(imidazolium)s (imidazolium ionenes) with decyl (“C10”) spacer groups were fabricated and shown to be selective for CO 2-based separations. An imidazolium ionene with the bromide counterion (Polymer 1) exhibited good H 2/CO 2 ideal (pure component) selectivity (6.0), while H 2 permeability was slightly lower than 1 × 10 −10 cm 3(STP) cm cm (−2) s (−1) cm Hg (−1) (1 barrer). A “Robeson Plot” was used to compare the separation performance of Polymer 1 to other dense polymer membranes. Polymer 2 was structurally similar to Polymer 1 with the exception of the bulky Tf 2N anion in place of the bromide. This polymer was found to have good CO 2/CH 4 and CO 2/N 2 ideal selectivities (20 and 24, respectively), but no H 2/CO 2 separation performance with a selectivity of 1.0. A stable composite film made from an imidazolium ionene (Polymer 2) and a room-temperature ionic liquid (RTIL) was also fabricated and showed large CO 2 permeability enhancements compared to the analogous neat polymer membrane, with little or no sacrifice in CO 2/N 2 and CO 2/CH 4 ideal selectivity. The separation performance of Polymer 2 and the Polymer 2–RTIL composite films were compared to previously studied “side-chain” poly(imidazolium)s (poly(RTIL)s) and other dense polymer membranes on “Robeson Plots.” Polymer 2 and the Polymer 2–RTIL composite films exhibited CO 2 permeabilities comparable to poly(RTIL)s. This is the first known study and application of imidazolium ionenes for CO 2 light gas separation membranes.