Abstract
This paper presents a hybrid energy harvester to harvest dual piezoelectricity and piezomagnetism using piezoelectromagnetic transduction. Multilayered configuration is used to design the proposed harvester, i.e., the cantilever. Silicon, Lead Zirconate Titanate (PZT-5H) and Stainless Steel 405 Annealed are used to configure the cantilever for 2 different cases. For both cases, the geometry is set to (10×1×0.3) mm3 device size. Several Eigenfrequencies are applied to evaluate the deformations of the cantilever. In addition, the influence of Eigenfrequencies on total cantilever displacements and elastic strain energy density are observed. From the findings, it is evident that, vertical displacement of the cantilever can be as high as 3 mm for both cases. However, case 1 and 2 has significant disagreement in elastic strain energy density which are approximately 0.2 and 2.5 J/m3 respectively. Hence, multilayered configuration is more beneficial in terms of energy penetration and significantly distinguished.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
