Abstract
One-seventh of the worldwide electricity is used for refrigeration related activities. When compared to the predominantly used vapor compression refrigeration system, magnetocaloric refrigeration provides an energy-efficient and eco-friendly alternative. It utilizes a magnetocaloric material which undergoes temperature changes when exposed to magnetic field changes. Nearly 60% of the total system cost is due to the permanent magnets used. For a given cooling power, the amount of permanent magnet needed is determined by the residence time required by the heat transfer fluid in each cycle. The start-of-the-art systems utilizes water-alcohol mixture as the heat transfer fluid, and a mechanical pump for its circulation. By utilizing non-toxic and non-hazardous gallium-indium-tin based liquid metals as heat transfer fluid, which has three order of magnitude higher thermal diffusivity, the residence time and the permanent magnetic material is reduced nearly by a factor of 10. Even accounting for the cost of the liquid metal, it results in considerable savings in the system cost. We present experimental results on the entropy change of using liquid metal with (Mn,Fe)2(P,Si)-based magnetocaloric material, and numerical results on the system level analysis. Further, to improve the reliability of the system, we propose to use magnetic pumping for heat transfer fluid circulation, which does not have any moving parts. The state-of-the art magnetic pump works at frequencies in the range of 100 to 1000 Hz. However, they cause detrimental heating effects due to eddy current losses. To overcome this, we have designed a pump that operates at 1 Hz and still achieves comparable flow rates. We present numerical results on the pump design by studying the dynamics of ferrofluid rise in a vertical pipe with multiple electromagnetic coils.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have