Abstract
The method of self-propagating high-temperature synthesis of submicron powders with subsequent vacuum sintering was used to produce a series of optical ceramics based on dysprosium oxide (DyxY0.95-xLa0.05)2O3, where x=0.7, 0.85, and 0.9. The influence of ceramics composition on optical transmission of the obtained samples was investigated. The studied materials had several transparency windows in the visible 500-730nm, near-IR 1900-2300nm, and mid-IR 3500-7500nm ranges. The dependence of the Verdet constant on wavelength in the 400-1940nm range was measured for each ceramics composition, and analytical approximations were obtained. When Y and La dopants were used, the Verdet constant depended linearly on the concentration of Dy3+ ions, and its value in the visible wavelength range was about twice that of the analogous value for a terbium gallium garnet crystal. The high transmission and relatively high Verdet constant make the produced materials highly promising for fabricating Faraday devices for Tm3+ and Ho3+ lasers and for lasers emitting in the visible spectrum.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
