Magnetization AC losses of MgB2 wires with thin filaments and resistive sheath

Abstract

Magnetization AC losses of fine-filamentary MgB2 wires with resistive CuNi sheaths were measured. The effects of varying the number of filaments (114–342, corresponding to effective filament diameters of 14–20 μm), twist pitch (10–30 mm) and outer sheath material on the total AC loss were studied. For a better understanding of individual loss contributions, the effects of varying applied temperature, magnetic field, and frequencies were examined. It is found that hysteresis loss per volume decreases with the reduced filament size and that coupling current losses play a dominant role. The effect of decoupling by twisting was clearly observed for the smallest twist pitches. Considering the possible degradation of transport currents by twisting, AC losses were also normalized by the critical currents of the same wires. While twisting to short pitch decreases losses significantly, it apparently does not reduce the transport current. Consequently, the fine-filamentary MgB2 wires with resistive CuNi sheath examined in this paper are excellent candidates for future low loss applications. Unlike ReBCO tapes, round MgB2 wires enable easy single strand twisting, and the braiding or cabling, of wires into a variety of specific shapes and diameters.