Magnetic soft silicone elastomers with tunable mechanical properties for magnetically actuated devices

Abstract

Polydimethylsiloxane (PDMS)/iron oxide magnetic nanoparticle (NP) composites with tailored mechanical properties are prepared for use in magnetically actuated soft devices based on their controlled deformation by the application of an external magnetic field. This investigation reports the synthesis and functionalization of iron oxide NPs, the preparation of the PDMS/NP composites, the evaluation of NP dispersion using scanning electron microscopy (SEM) and optical microscopy, and the mechanical characterization of the composite films. Characterization includes rheological measurements as well as stress‐strain curves to obtain the Young modulus and elongation at break. SEM is used to probe individual NP dispersion, whereas optical microscopy provides rapid access to quantitative information about the size and distribution of particle aggregates. Results for nonfunctionalized (nf), oleic acid (OA)‐coated, and stearic acid (SA)‐coated iron oxide NPs and their blends are presented. PDMS elastomers containing both OA‐ and SA‐coated iron oxide NPs are found to have very low Young moduli with substantially higher resistance to failure than neat PDMS. For example, a formulation containing 2.5 wt% OA‐coated NPs and 2.5 wt% SA‐coated iron oxide NPs has a modulus of 0.15 MPa (compared with 0.24 MPa for neat PDMS), while it can withstand an elongation of about 1.5 times its initial length compared with only 0.3 times for neat PDMS. As a comparison, the modulus of the most commonly used commercial PDMS elastomer (Sylgard 184) is an order of magnitude higher than that of the composites prepared here, whereas maximum elongation is similar for the two. The formulations developed in this work could be used in applications where high deformability is required with limited magnetic field strength and/or NP loading.