Abstract
This paper presents a magnetic resonance wireless power transfer (WPT) system that uses three coils, a planar receiver and operates at 6.78 MHz,. Effective power transfer is ensured by establishing an impedance matching condition for this WPT system. A metamaterial (MTM) array having dimensions of 20 cm X 30 cm is also positioned near the load coil to concentrate the magnetic field and enhance the transfer efficiency. The result is a maximal improvement of 27% in the transfer efficiency at a transfer distance of 50 cm. The impact of a ground plane on the transfer efficiency is also examined. By utilizing the MTM array, making slits on the ground plane and increasing the gap between the ground plane and the load coil, it is possible to mitigate this impact. The highest transfer efficiency improvement is about 55% at a distance of 20 cm with the ground plane. A practical laptop model is fabricated to verify the impact of the load coil angle and position on the transfer efficiency. The result shows that the maximum transfer efficiency with the laptop model is 47.58% with the load coil angle of 90 degree.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.