Abstract
Depressurization is considered to be the most promising method for exploitation of natural gas hydrate. To analyze the characteristics of hydrate dissociation during depressurization, methane hydrate (MH) dissociation was performed at different depressurizing ranges and rates, and the hydrate dissociation process was directly observed using magnetic resonance imaging (MRI). The experimental results indicate that with increased depressurizing rate from 0.01MPa/min to 0.1MPa/min, the average dissociation rate increases for a given depressurizing range. Meanwhile, with an increase in depressurizing range from 0.3MPa to 1.1MPa, the average dissociation rate increases for a given depressurizing rate. Moreover, the hydrate dissociation process can be divided into two main stages: hydrate saturation remains constant with little fluctuation for several minutes after back-pressure decreases, and then the hydrate dissociates continuously until dissociation completes. In addition, excessively high depressurizing range and rate result in hydrate reformation and ice generation, which slow the rate of hydrate dissociation. Furthermore, it was also determined that MH reformation and ice generation always occur at the higher depressurizing range and rate due to insufficient heat transfer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.