Abstract
In this research a mixture of barium ferrite and graphite powders was milled in a planetary ball mill and then heat treated in vacuum to produce BaFe12O19/Fe3O4 and Fe/Fe3O4 magnetic nano-composites. The effects of milling time and heat treatment temperature on the characteristics of powder mixture were investigated by X-ray diffraction analysis, vibrating sample magnetometer, transmission electron microscopy and Mössbauer spectroscopy. Phase analysis results showed that Fe2O3 in barium ferrite partially reduced to Fe3O4 during milling; hence, the reduced phase and remaining barium ferrite formed a nano-composite of BaFe12O19/Fe3O4 after 20 h of milling. Heat treatment of the 40 h milled samples at 750–900 °C resulted in formation of Fe containing nano-composite. Magnetic measurements indicated that the coercivity of 267.92 Oe for 40 h milled sample decreased to 22.57 Oe by heat treatment at 900 °C, while its saturation magnetization increased from 31.56 to 169.43 emu/g due to the formation of Fe nano-crystallites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.