Abstract
This report relates to magnetic properties of sintered Alnico type permanent magnet. The effects of history of iron powders, degree of oxidation of iron, nickel, cobalt, and copper powders, degree of evacuation and sintering time, and magnetic field cooling rate were investigated. Forming pressure, sintering temperature, degree of evacuation in sintering process, magnetic field cooling rate (900-700°C) of sintered permanent NKS-3 magnet are 6T/cm2, 1270-1300°C (NKS-1DA : 1350°C), 10 -1-10-3mmHg, 3-13 minute respectively.Carbonyl, reduced (MH-300⋅P) and electrolytic iron powders are adequate for producing sintered NKS permanent magnet, and magnetic properties are improved by reducing iron, nickel, cobalt and copper powders, with hydrogen. At least lhr was necessary at 1300°C for obtaining well sintered product.The best times of magnetic field cooling are 5-7 and 10 min. for titanium and silicon addition respectively. Addition of titanium reduces both remanence and maximum energy product value but increases coercive force.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Japan Society of Powder and Powder Metallurgy
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
