Abstract
A soft magnetic MnZn-type ferrite is considered for high frequency applications. First, the morphological, structural, and chemical composition of the material are presented and discussed. Subsequently, by using a vibrating sample magnetometer (VSM), the hysteresis loops are recorded. The open magnetic circuit measurements are corrected by employing demagnetization factors, and by taking into consideration the local magnetic susceptibility. Finally, the hysteresis losses are estimated by the Steinmetz approach, and the results are compared with available commercial information provided by selected MnZn ferrite manufacturers. Such materials are representative in planar inductor and transformer cores due to their typically low losses at high frequency, i.e., up to several MHz, in low-to-medium power applications and providing high efficiency of up to 97%–99%.
Highlights
Planar transformers are an essential part of today’s high-end electronic devices due to their outstanding power density capabilities, responding to the increasing demand in creating various smaller-sized vs. cost-efficient types of converters [1]
The hysteresis losses are estimated by the Steinmetz approach, and the results are compared with available commercial information provided by selected ferrite manufacturers
The spinel structure has been found to be significantly influenced by the preparation of the ferrite ceramic
Summary
Planar transformers are an essential part of today’s high-end electronic devices due to their outstanding power density capabilities, responding to the increasing demand in creating various smaller-sized vs. cost-efficient types of converters [1]. In such units, size is directly related to switching frequency, with higher frequencies translating into smaller volume and into higher efficiency if the right transformer design is chosen. 100 W), typical efficiency of ~97%–99%, small winding area, low profile that improves heat dissipation, and lower leakage inductance due to reduced/interleaved windings Planar transformers find their applications in numerous high-end electronics, where a high switching frequency is required while the allowed space is reduced, e.g., in telecommunications, medical instruments, automotive vehicles, defence systems, power conversion, and interference suppression [7]. The hysteresis losses are estimated by the Steinmetz approach, and the results are compared with available commercial information provided by selected ferrite manufacturers
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have