Abstract
La 0.60 Sr 0.40 MnO 3 (LSMO) thin films of varying thickness from 12 to 55 nm were deposited using the pulsed-laser deposition technique onto single-crystalline SrTiO3 (STO) and STO-buffered Si substrates. The Tc of LSMO films grown on STO-buffered Si substrates decreases faster than films directly grown on STO with decreasing film thickness. The LSMO/STO film with thickness of 55 nm shows Tc at about 360 K, which is close to the bulk value, whereas Tc LSMO film on STO-buffered Si film of similar thickness is reduced to 320 K. This difference is attributed to the strain and interfacial disorders in LSMO film on STO/Si. The film surface morphology is influenced by the film thickness. Oxygenation of LSMO films on STO-buffered Si affects the Tc minimally but improved the overall magnetization of the films due to better oxygenation, which is also the case for postannealing the sample at elevated temperatures. The thermomagnetic history effects observed in LSMO films of STO-buffered Si indicate the presence of inhomogeneity, mostly at the interface, which influences the magnetic properties significantly.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.