Abstract
The structure and magnetic properties of FePt films with multilayered structure have been investigated. Intermediate layer of Cu or Fe/Au was inserted between top and bottom FePt layers. From X-ray diffraction patterns, the (002) fundamental peak and (001) and (003) super lattice peaks of the L10 phase have been clearly observed for all the samples. The peak from FePt (200) has begun to observe for FePt/Cu/FePt films at the thickness of more than 3 nm. With increasing the intermediate layer thickness (t), coercivity measured in the direction perpendicular to the film plane was increased. However, an uniaxial magnetocrystalline anisotropy (Ku) was decreased for FePt/Cu/FePt films, while Ku maintains a large value of 4×107 (erg/cm3) for FePt/Fe/Au/FePt films. It was confirmed that the top FePt layer was grown epitaxially on the intermediate layer of Fe/Au without deterioration of the large Ku.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.