Abstract
High magnetocrystalline anisotropy (Ku) material was required for future heat assisted magnetic recording media. The ordered L1 0 FePt film can be prepared to have high [001] texture which shows high perpendicular magnetic anisotropy. Epitaxial growth of FePt films on MoC/CrRu/glass have been proved to promote chemical ordering and texturing. Dual-segregants such as transition metal-oxide with carbon have been used to obtain FePt granular structure and columnar grains. In this study, the magnetic properties and microstructure of FePt(MoC, C) films were discussed and the segregant materials were MoC and C. The Mo 40 C 60 was co-sputtered with FePt and the carbon was diffused from the MoC intermediate layer. The MoC phase is formed at equal atomic ratio or higher C concentration. The Mo 50 C 50 film with equal atomic ratio has been studied previously [1] and chemical composition of Mo 40 C 60 film was discussed in this study. When the atomic concentration of C is above 50%, the MoC and C phases are co-existed. The excess C was used as one of the segregant to diffuse up to separate FePt grains from intermediate layer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.