Abstract
Magnetic NiFe2O4 nanoparticles and multi-walled carbon nanotubes functionalized cellulose composite (m-NiFe2O4/MWCNTs@cellulose) as a magnetic bioadsorbent was prepared and used for effectively removing Congo Red (CR) from aqueous solution. The chemical and physical properties of the prepared m-NiFe2O4/MWCNTs@cellulose were characterized by XRD, TGA, FT-IR, VSM, SEM and TEM. Batch experiments were carried out to investigate the adsorption capacity and mechanisms. Effects of different adsorption parameters such as initial CR concentration, adsorbent dosage and temperature were studied. Results demonstrated that m-NiFe2O4/MWCNTs@cellulose had high adsorption capacity for CR from aqueous solution. The obtained experimental data fitted well with the pseudo-second-order equation and followed the Langmuir isotherm model with a maximum adsorption capacity of 95.70 mg g−1 for CR. The m-NiFe2O4/MWCNTs@cellulose with rapid magnetic separation and high adsorption capacity can be a promising and recyclable engineering biomaterials for purification and treatment of practical wastewater.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.