Abstract
The automatized scanning spectrometer of ferromagnetic resonance has been designed for measuring a distribution of in-plane magnetic anisotropy, effective saturation magnetization, coercivity, and other performances across the area of thin magnetic films (TMFs) in a monodomain state. The spectrometer is supplied with a set of plug-in measuring heads overlapping frequency band 0.1 /spl divide/ 6.0 GHz. The degree of locality of measurements in the range 0.3 /spl divide/ 2.5 mm is defined by the size of the measuring hole in the microstrip resonator built in the head. The signal-to-noise ratio of the heads is not less than 10 for permalloy film of 100-/spl Aring/ thickness when the locality of measurements is about 1 mm, and it can be increased considerably in the signal accumulation mode. Magnetic imaging is demonstrated with an example of purposely-stressed TMFs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.