Abstract
An investigation on the use or a magnetic fluid-based process for float-sink separations of coal was conducted. The required magnetic field was generated with a Frantz electromagnet using redesigned pole pieces. Finite element analysis was used to analyze the magnetic field distribution between the poles as a function of current intensity. The simulated results compared well with the measured values. Viscosity measurements of the water-based magnetic fluid showed that the viscosity remained relatively low even under high magnetic field strengths. Several size fractions of bituminous coal (0.59x0.50mm and 0.18 x0.15mm) and anthracite (0.50x0.l8mm and 0.18 x 0.15 mm) were separated in a batch separation cell, which was designed to fit between the pole pieces. The yields compared well to those obtained using organic liquids and zinc bromide solutions. However, the ash and sulfur contents of the float material were higher when using the magnetic fluid method, particularly in regions of high near-density material. The differences can be attributed to particle misplacement resulting from slight variations in the magnetic field gradient and the subsequent effect on the apparent density of the fluid.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
