Abstract
Ordered hexagonal arrays of NiFe homogeneous nanowires and NiFe/Cu multilayer nanowires were fabricated by electrodeposition into alumina membranes with pore diameter about 70nm and 35nm and 105nm interpore distance, with a NiFe nanodisc thickness of 60 and 70nm, and a Cu thickness of 50 and 10nm. The hysteresis loops were measured with the applied magnetic field parallel and perpendicular to the wire axis using a VSM. The homogeneous NiFe nanowire array exhibits a nearly isotropic magnetic behavior. In the multilayer nanowire arrays of 70nm diameter, the preferential direction of magnetization is perpendicular to the wire axis and the measured coercive field decreases as the tCu/tNiFe increases. The magnetization processes in multilayer nanowire arrays of 70nm diameter have been investigated by means of micromagnetic simulations of isolated, 2 and up to 9, wires. The magnetization distributions for the two 21(NiFe60/Cu50) and 21(NiFe70/Cu10) multilayer nanowire arrays of 70nm diameter, with the applied magnetic field in the wire axis direction, indicate that magnetization occurs by vortex nucleation at the ends in all the wire nanodiscs. For the samples of the same composition mentioned above, but of 35nm diameter, the reversal magnetization starts by nucleation of a domain wall. A random orientation of the magnetization in the different nanodiscs for the sample of 21(NiFe60/Cu50) can be observed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
