Abstract
Present research work narrates synthesis, structural, thermal and magnetic characteristics of Pr4Fe67Nb4Cu2Zr1B22 nanocomposite magnets. Amorphous Pr4Fe67Nb4Cu2Zr1B22 rods were produced through injection casting technique and permanent magnetic characteristics were obtained by one-step annealing the amorphous rods. XRD analysis elucidated that as-cast rods have amorphous phase structure and annealed magnets have tetragonal Pr2Fe14B hard phase, cubic structural α-Fe phase and tetragonal Fe3B soft phase. Optimal annealed magnet composed of 63% Pr2Fe14B hard phase, 26% α-Fe and 11% Fe3B soft phases with mean grain sizes around 51.6 ± 1 nm for Pr2Fe14B, 25.4 ± 2 nm for α-Fe and 21.5 ± 2 nm for Fe3B phases. Microscopic and atomic probe studies showed that the annealed magnet consists of Pr2Fe14B, α-Fe, Fe3B nanosized grains interlinked with thin grain boundaries. Henkel curve evidenced the existence of inter-grain exchange coupling between magnetic nanophase grains. Magnetic hysteresis measurements revealed that Pr4Fe67Nb4Cu2Zr1B22 nanocomposite magnet yielded maximum magnetic characteristics such as coercivity Hc of 382 kA/m, remanence Br of 0.70 T and maximum energy product (BH)max of 64.2 kJ/m3 with rare earth to iron ratio 4:67.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
