Abstract
Nickel ferrite (NixFe3-xO4) have been synthesized using solid state reaction with composition (2x)NiO : (3-x)Fe2O3 (x = 0.5; 1.0; 1.5 dan 2.0) in mol in wt%. Mixing of this powder was milled with HEM (High Energy Milling) for 10 hours, and then sintered at 1000 °C for 3 h. X-ray diffraction pattern indicates that the all of samples are single phase in this stage. FTIR (Fourier transform infrared) analysis showed two absorption bands in the range of ~410 - ~600 cm-1 related to octahedral and tetrahedral sites. The magnetic measurement using vibrating sample magnetometer (VSM) shows that the sample exhibited a ferromagnetic behaviour with its coercivity value in the range of 164-217 Oe, and the maximum value wasshowed by x =1.5. VNA (Vector Network Analyzer) characterization shows the ability electromagnetic wave absorption with RL (reflection loss) value of -28 dB occurs at frequency of 10.98 GHz. It means that the Ni1.5Fe1.5O4 sample can absorb microwave about ~96 % at 10.98 GHz.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Malaysian Journal of Fundamental and Applied Sciences
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
