Abstract
Variable flux permanent magnet synchronous machines (VF-PMSMs) use permanent magnet magnetization as an additional degree-of-freedom to reduce losses based on operating conditions (e.g., at medium to high speeds, losses are reduced by using a lower magnetization). Magnet properties are known to be dependent on temperature; therefore, the magnet temperature effects on magnetization manipulation and maximum torque properties in VF-PMSMs are investigated in this paper with FEA simulations and experiments. Increased magnet temperature changes the available range of attainable magnetization levels and makes demagnetization occur more easily; therefore, a different current angle and magnetization are needed for maximum torque operation. The temperature effects on high speed magnetization manipulation methods (which are needed for driving cycle loss reduction and full power capability) are evaluated with simulation and experiments on a prototype 80 kW traction machine. A closed loop method for magnetization manipulation that mitigates the effect of temperature is proposed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.