Abstract

Investigations focusing on wellhead encrustations within select zones of emergence of mineral water, in different hydrogeological provinces, were conducted from 2014 to 2017 in Serbia. They included: well BB-1 in Bogatic (Inner Dinaric Alps of western Serbia), wells LB-4 and LB-5 in Lukovska Banja (Sumadija-Kopaonik-Kosovo Province), and wells VG-2 and VG-3 in Vranjska Banja (Serbian Crystalline Core). The studied occurrences belong to the group of hot mineral waters, with temperatures ranging from 62°C to 93.9°C, and total dissolved solids (TDS) from 600 to 1267 mg/L. They are mildly acidic to mildly alkaline (pH 6.6 – 8.0) and their genetic types are HCO3--Na++K+ (Bogatic and Lukovska Banja) and SO42-, HCO3--Na++K+ (Vranjska Banja). Macroscopic, optical and diffraction assessment revealed that the encrustations comprised calcite and aragonite minerals, along with some local quartz, muscovite, albite and clinochlore. The conclusion was that there was a predominant presence of calcium carbonate in all the occurrences, represented by crystalline calcite grains, characteristically birefractive, and dark, semitranslucent grains in the form of microcrystalline calcite highly stained by iron hydroxides (Bogatic), as well as crystalline calcite with radially developed carbonate - aragonite (Lukovska Banja) and rod-like and filamentous aggregates of aragonite and calcite, highly translucent in places (Vranjska Banja).The texture of the samples exhibits alternating horizontal or wavy carbonate laminae. In Vranjska Banja, they include thin micritic to medium crystalline laminae and laminae composed of aggregates of aragonite needles in the form of bunch. In Bogatic and Lukovska Banja, there are thick micritic and highly porous laminae, 0.025 to 1 mm thick, or interlayers of a coarser crystalline structure. Apart from encrustations, all the occurrences exhibit phototrophic microbial mats, which were analyzed by scanning electron microscopy. The onset and progress of encrustation are primarily influenced by the physical and chemical composition of the mineral water (T, pH, TDS, HCO3-, Ca2+, CO2, etc.), as corroborated by hydrogeochemical modeling software PHREEQC 3.4.0. In addition, phototrophic biofilms might be contributing to the creation and accumulation of minerals in the encrustations.

Highlights

  • In Serbia to date, encrustations have frequently been noted on the technical elements of mineral water wells (LAZIĆ, 2004), as well as within zones of emergence (PROTIĆ, 1995; ŠARABA et al, 2017).Encrustations are typical only of the upper part of the well casing, caused by a higher flow velocity in that region (HOUBEN & WEIHE, 2010).Encrustations are precipitates of salts and alkalis, which most frequently takes place in mineral waters from aquifers with dis­ solved calcium, magnesium and iron

  • The chemical composition of mineral water is a key driver of the onset and progress of encrustation, given that the process is pri­ marily steered by dissolved salts

  • The results of physical and chemical analyses showed that the mineral waters at Bogatić and Lukovska Banja are of the HCO3- ion (HCO3)--Na++K+ type, and at Vranjska Banja of the SO42, HCO3-Na++K+ type

Read more

Summary

Introduction

In Serbia to date, encrustations have frequently been noted on the technical elements of mineral water wells (wellheads, screens, pumps, discharge pipes, and the like) (LAZIĆ, 2004), as well as within zones of emergence (PROTIĆ, 1995; ŠARABA et al, 2017).Encrustations are typical only of the upper part of the well casing, caused by a higher flow velocity in that region (HOUBEN & WEIHE, 2010).Encrustations are precipitates of salts and alkalis, which most frequently takes place in mineral waters from aquifers with dis­ solved calcium, magnesium and iron. In Serbia to date, encrustations have frequently been noted on the technical elements of mineral water wells (wellheads, screens, pumps, discharge pipes, and the like) (LAZIĆ, 2004), as well as within zones of emergence (PROTIĆ, 1995; ŠARABA et al, 2017). Precipitation is the result of a change in ambient conditions (pH, temperature, pressure, solute concentration) due to mineral water pumping, which causes supersaturation of the solution and the formation of encrustations (PAPIĆ, 1999; HOUBEN, 2000; HOUBEN, 2001; GARCIA et al, 2005; de ZWART, 2007; DRAGIŠIĆ & POLOMČIĆ, 2009). Encrustation of the technical components of wells is non-uniform (HOUBEN, 2006), with more intensive precipitation on smooth than rough surfaces (DRISCOLL, 1986; HOUBEN & TRESKATIS, 2007).

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call