Macroencapsulated Al-Si phase change materials for high temperature latent thermal energy storage

Abstract

This research investigated the encapsulation of Al-Si alloy phase change materials (PCMs) for efficient thermal storage at high temperature. Two strategies, the direct powder formation route and in situ powder alloying formation route, were employed successfully. In the direct powder formation route, Al-Si alloy powders were spheroidized into spheres and encapsulated within Al2O3 powder shells with the help of organic binder, which were finally sintered at high temperature, forming Al-Si@Al2O3 capsules with cavities. Isostatic pressing at 50 MPa and 200 MPa were applied to the Al-Si cores, in order to optimize the cavity size. In the in situ powder alloying formation route, Al and Si powders were used as raw materials, which could be in situ transferred to Al-Si alloy inside the capsule during the sintering formation process. With the powders as the raw materials, the final capsules obtained after sintering could provide a buffer cavity inside the capsules, which could accommodate the volumetric expansion of the PCMs during melting, thereby mitigating the potential leakage and rupture of the capsules. Investigations into the melting-solidification cycles revealed the remarkable durability of the Al-Si phase change capsules. Isostatic pressure treatment decreased internal ineffective cavities, improving the heat storage density of the capsules. The Al-12Si(Ar)-200 MPa capsule exhibited superior thermal storage performance, enduring up to 1300 cycles. The Al-12Si core had a melting enthalpy of 479 J/g, while the thermal storage density of the phase change capsule within the temperature range of 500 °C–700 °C reached 496 J/g. The results underscore the significant potential of macroencapsulated Al-Si PCM, positioning it as a promising candidate for high-temperature thermal storage applications.