Abstract
An accurate description of concrete crack propagation is essential to practical engineering. In this paper, the cohesive zone model (CZM) is used to investigate the macroscopic mechanical properties and the microscopic crack damage behavior of concrete beams in the three-point bending test. Five key factors controlling the cracking of cohesive elements, namely mode I fracture energy, mode II fracture energy, shear strength, tensile strength, and elastic modulus (stiffness), are subjected to parametric examinations. Based on macro-mechanical properties and micro-cracking, the test results and parametric models of specimens are inversely analyzed. The applicable parameter range of control factors in the three-point bending simulation is obtained. Considering the quantitative aggregate information of specimens with different mix proportions, three computation models with different aggregate areas are established. The quantitative results of crack propagation are derived by applying the parameter range. Finally, the accuracy of the parameter range is validated based on the simulated and experimental mechanical properties and quantitative results of cracks.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
