Abstract

Epitaxially grown quantum dots (QDs) are established as quantum emitters for quantum information technology, but their operation under ambient conditions remains a challenge. Therefore, we study photoluminescence (PL) emission at and close to room temperature from self-assembled strain-free GaAs quantum dots (QDs) in refilled AlGaAs nanoholes on (001)GaAs substrate. Two major obstacles for room temperature operation are observed. The first is a strong radiative background from the GaAs substrate and the second a significant loss of intensity by more than four orders of magnitude between liquid helium and room temperature. We discuss results obtained on three different sample designs and two excitation wavelengths. The PL measurements are performed at room temperature and at T = 200 K, which is obtained using an inexpensive thermoelectric cooler. An optimized sample with an AlGaAs barrier layer thicker than the penetration depth of the exciting green laser light (532 nm) demonstrates clear QD peaks already at room temperature. Samples with thin AlGaAs layers show room temperature emission from the QDs when a blue laser (405 nm) with a reduced optical penetration depth is used for excitation. A model and a fit to the experimental behavior identify dissociation of excitons in the barrier below T = 100 K and thermal escape of excitons from QDs above T = 160 K as the central processes causing PL-intensity loss.

Highlights

  • Semiconductor quantum dots (QDs) are central building blocks for advanced applications. These range from QD-based lasers with low threshold currents [1], over quantum information processing and quantum cryptography [2,3], exploiting QDs, for example, as single [4] and entangled photon sources [5] to further optoelectronic applications, such as solar cells [6,7] and optical amplifiers [8]

  • The central method for GaAs QD fabrication is local droplet etching during solidsource molecular beam epitaxy (MBE) [28,29,30,31,32]

  • We note that no background from the GaAs substrate is visible at the cryogenic temperatures

Read more

Summary

Introduction

Semiconductor quantum dots (QDs) are central building blocks for advanced applications. The most popular mechanisms for the spontaneous accumulation of QD material are the strain-induced growth in the Stranski–Krastanov mode [11,12,13,14,15] and droplet epitaxy in the Volmer–Weber mode [16]. The former works only with lattice-mismatched material combinations and produces QDs that are substantially strained [17], usually leading to a strong fine-structure splitting [18]. The droplet epitaxy method, on the other hand, produces strain-free QDs [21,22,23], but their fabrication requires an advanced growth

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call