Luminescence and temperature-sensing properties of Li+, Na+, or K+, Tm3+, and Yb3+ co-doped Bi2WO6 phosphors

Abstract

Abstract A series of Li+, Na+, or K+, Tm3+, and Yb3+ co-doped Bi2WO6 upconversion phosphors were prepared by a high-temperature solid-phase method at 800°C for 3 h. X-ray diffraction showed that Li+, Na+, K+, Tm3+, and Yb3+ doping did not affect the orthorhombic structure of the Bi2WO6 matrix. Scanning electron microscopy images of the Bi2WO6:1% Tm3+, 6% Yb3+ and 1% Li+, 1% Na+, or 1% K+-doped Bi2WO6:1% Tm3+, 6% Yb3+ samples reveal irregular particles with a 0.5–5 µm particle size range; upon Na+ or K+ doping, the particle size increases and the particle surface becomes smooth. EDS analysis shows that the above ions are well incorporated into the powder particles. At 298 K, the relative temperature sensitivities are 0.00144, 0.0016, 0.0024, and 0.0018 K−1 for the 1% Tm3+, 6% Yb3+:Bi2WO6 samples without alkali metal ions and doped with 1% Li+, 1% Na+, or 1% K+ based on the thermally coupled energy level 3F3/3F2 characterization temperature. However, under the same conditions, when using the nonthermally coupled level 3F3/1G4 characterization temperature, the relative temperature sensitivities of these four samples are 0.0378, 0.0166, 0.046, and 0.0257 K−1, increasing by 26.3, 10.3, 19.1, and 13.9 times, respectively. The relative temperature sensitivities of the 1% Na+, 1% Tm3+, and 6% Yb3+:Bi2WO6 samples are the highest at 298 K.