Abstract
We describe a novel capacitance measurement technique which is used to determine lubricant film thickness on magnetic thin-film rigid disks. Using this technique, variations in lubricant thickness as small as 0.1 nm can be measured quickly and nondestructively. Film thickness measurements made with an ellipsometer are found to be comparable to the capacitance measurements. We compare the uniformity in film thickness of disks lubricated with a dip-coating process with that of disks lubricated with a drain-coating process and find that the drain coated disks have better film uniformity than those that are dip coated. Also, wear tracks in fully bonded and partially bonded perfluoropolyether lubricants are profiled. We find that lubricant depletion occurs more rapidly in fully bonded lubricant than in partially bonded lubricant and that some recovery of the partially bonded lubricant occurs while none is observed in fully bonded lubricant.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.