Abstract
In a project funded by the Federal Aviation Administration's (FAA) Aging Aircraft Program, a Portable Holographic Inspection System (PHITS) has been further developed. The technique involves taking a double exposure white light reflection hologram of aircraft structures. Each exposure is taken at a slightly different load state, and the resulting interferogram shows the deformations that occur between the two load states. Results showed that the rivets in a simple lap joint, designed to simulate the longitudinal lap splice on a Boeing 737, behaved in two distinct and easily recognizable modes. The first mode occurred at low loads and was an indication that friction forces between the two sheets of the lap joint dominated the load transfer mechanism. Indications were that the second mode related to higher loads for which the friction forces played a much lesser role. The load at which the changeover begins to occur has been called the critical load. Preliminary experiments showed that structures with a high value of critical load had a fatigue life of order ten times that of a normally fastened splice. Critical load can be readily determined in the field using the PHITS system. Research designed to establish the relationship between fatigue life and critical load is continuing. An understanding of that relationship could lead to a technique capable of fatigue life determination in typical aircraft structures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.