Abstract
Camera-on-a-CMOS chip will be an inevitable component of future intelligent vision systems. However, up till now, the dominant format of data in imaging devices is still analog. The analog photocurrent or sampled voltage is transferred to the ADC via a column or a column/row bus. Moreover, in the active pixel configuration the area occupied by circuitry reduces significantly the fill factor, so that there are heavy constraints imposed on the size of the circuits used. In this paper a concept of back illuminated focal plane is presented. The system consists of two chips bonded face to face using Indium bumps. The top chip, which is the seeing chip, is thinned and the light signal is applied to the bottom surface. The bottom chip is the processing chip and it contains a distributed array of analog-to digital converters. As the seeing chip is fully dedicated to photosensors the fill factor can be increased from 25-40% possible on a single plane to over 95% with two planes. The analog-to-digital converters are algorithmic current-mode converters, where one-bit cell is implemented in the processing area facing one-pixel. Eight such cells are cascaded to form an 8-bit converter. As a result, a fully digital pixel readout is obtained.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.