Abstract
This paper describes some poled electrooptic bulk polymers (EOP) of the guest/host type having a cured epoxy resin as the host. The electrooptic polymers of typical dimensions 13 X 13 X 3 mm are characterized with respect to application as Pockels materials in an optical high voltage sensor. The electrooptic coefficients obtained here are of the same order of magnitude as those which are required for high voltage applications. An optical sensor based on disperse red 1 dye and an epoxy polymer is developed. It is able to measure voltages up to 10 kV AC. It is shown that bulk EOP can be produced with relatively large physical dimensions comparable to commercially available Pockels crystals. A technique is described which compensates for the inevitable intrinsic birefringence built into most bulk polymers. The epoxy based EOP shows high orientational stability, even when compared with a polysulfone based EOP having a higher glass transition temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
