<title>Automatic detection of pulmonary nodules in low-dose screening thoracic CT examinations</title>

Abstract

Computed tomography of the chest can be used as a screening method for lung cancer in a high-risk population. However, the detection of lung nodules is a difficult and time-consuming task for radiologists. The developed technique should improve the sensitivity of the detection of lung nodules without showing too many false positive nodules. In a study, which should evaluate the feasibility of screening lung cancer, about 1400 thoracic studies were acquired. Scanning parameters were 120 kVp, 5 mm collimation pitch of 2, and a reconstruction index of 5 mm. This results in a data set of about 60 to 70 images per exam. In the images the detection technique first eliminates all air outside the patient, then soft tissue and bony structures are removed. In the remaining lung fields a three-dimensional region detection is performed and rule-based analysis is used to detect possible lung nodules. This technique was applied to a small subset (n equals 17) of above studies. Computation time is about 5 min on an O2 workstation. The use of low-dose exams proved not be a hindrance in the detection of lung nodules. All of the nodules (n equals 23), except one with a size of 3 mm, were detected. The false positive rate was less than 0.3 per image. We have developed a technique, which might help the radiologist in the detection of pulmonary nodules in CT exams of the chest.