Abstract
Low temperature sintering NiCuZn ferrite was employed at most cases due to its co-firability with Ag (below 960 °C). The NiCuZn ferrite sintered body with high-strength and high-frequency magnetic properties was fabricated. Firstly, NiCuZn ferrite powder was synthesized under CO 2 atmosphere at 500 °C from the mixed doxalate synthesized by liquid phase precipitation method. Then a small amount of boric acid (H 3BO 3) was added to the powder, and the NiCuZn ferrite powder compact was prepared with Newton press and CIP methods. Finally, NiCuZn ferrite sintered body was fabricated by sintering at 900 °C under CO 2 atmosphere. The minimum sintering temperature (800 °C) was determined by the study of high temperature shrinkage. By this method, NiCuZn ferrite sintered body with 0.5% (mass fraction) boric acid was obtained, which has the bending strength of 340 MPa. The effect of various Mn addition on electromagnetic properties were studied.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
