Abstract
Spin-dependent tunnel junctions with the structure (Ta 70 /spl Aring//NiFe 70 /spl Aring//MnIr 80 /spl Aring//CoFe 35 /spl Aring//HfAlO/sub x//CoFe 35 /spl Aring//NiFe 40 /spl Aring//TiW(N) 150 /spl Aring/) were fabricated on top of 600-/spl Aring/-thick ion-beam-smoothed low-resistance Al electrodes. HfAlO/sub x/ barriers were formed by natural oxidation (5 min at 1 torr in pure O/sub 2/) of 5-/spl Aring/-thick (2-/spl Aring/ Hf+3-/spl Aring/ Al) films or 6-/spl Aring/-thick (2-/spl Aring/ Hf+4-/spl Aring/ Al) films. Resistance/spl times/area (R/spl times/A) products of 0.65 /spl Omega//spl times//spl mu//sup 2/ and 2.1 /spl Omega//spl times//spl mu/m/sup 2/ were achieved with 9.5% and 13.5% tunnel magnetoresistance signal (TMR), respectively. Current inhomogeneity effects on the measured (R/spl times/A) products and TMR values were calculated in particular for junctions with resistance below 1 /spl Omega//spl times//spl mu/m/sup 2/. Transmission electron microscopy indicates that HfAlO/sub x/ forms a continuous amorphous barrier that follows conformally the topography of the bottom electrode. X-ray photoelectron spectroscopy analysis indicates that 2.5% metallic Hf is left inside the barrier closer to the bottom electrode. These low-resistance tunnel junctions are attractive for read-head applications at recording densities above 100 Gbit/in/sup 2/.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
